My Cart: 0 item(s)
Thumbnail Filmstrip of Hella Adapter from 165mm Sealed Beams to H4 Conversion Lamps, 003385001 Images
SPECIFICATIONS
HELLA P/N: 003385001
SMS P/N: HL66490
INPUT CONNECTOR: H4 MALE
OUTPUT CONNECTOR H4 FEMALE
LENGTH: 6"
PURPOSE: CORRECT THE PINOUT SO THE BULB WORKS PROPERLY.
MODIFICATION TO VEHICLES WITH ONLY TWO 165 MM HEADLAMPS
- The pin-out of 165mm lamps is different than other sealed beam lamps. See the chart above.
- To make this conversion simple we offer our P/N HL66490, Hella P/N 003385001 which will make it plug and play.
- Some cars, mostly the ones with only two headlamps, require the H6545, 4666 or 4668 lamp. These lamps had the ground lug on an angle. I assume this was to insure you install a high/low beam lamp. At one time we could get the adapters with the angled ground, but no more. Y
- You will have to release the male connectors from their holder and insert them into the the stock connector, IN THE PROPER ORDER. The chart above will show you the proper pinout.